Olight PL-3S Valkyrie Rail Mountable LED Torch
The Olight PL-3S Valkyrie features a maximum output of 1000 lumens from the high performance cool white LED. As this is a high drain device, the temperature regulation will automatically drop the brightness to 450 lumens after 7 minutes to protect the LED.
It is designed for handguns with a picantinny rail or a glock style rail and comes with two mount adaptors (1913 and GL) to make it compatible with a wide range of handguns. There is also an adjustable sliding block with three positions to allow for flexible positioning on a variety of rails.
The PL-3S is attached to the weapon rail using the secure screw locking mechanism by loosening the screw on the side by hand, or with the included hex wrench. Once loose the screw pushes in to open up the bracket and allow the PL-3S to be positioned onto the rail. When in place the screw can be released to allow the bracket to close around the rail, and the screw can be tightened to keep the torch securely in place.
Two ambidextrous switches and are located on the back of the light and are pushed from the side to activate the light. A quick press and release of the either button will turn the light on in the last used output and another quick press will turn the light off. If you don’t press and release the button quick enough it will trigger the momentary operation and the light will stay on until you release the button.
While the light is on low and high can be changed between with two quick presses of either button. High can also be directly accessed from off with two quick presses. Strobe can be activated or exited by pressing and holding both buttons at the same time.
Powered by two CR123A lithium metal non-rechargeable batteries (Energizer, Panasonic, Duracell) which can be replaced by lifting the flap between the buttons to allow the opening of the tail cap.
Light, versatile and compact, the PL-3S Valkyrie is the perfect companion for your handgun.
Product Features
Ambidextrous switch for left or right hand operation
Adjustable sliding block with three positions
1912 and GL mount adaptors
Two brightness levels and strobe
Operational Modes
High:
1000 lumens; 7 minutes run-time; 200 m beam range
450 lumens; 110 minutes run-time
200 lumens; 20 minutes run-time*
Low: 200 lumens; 5 hours, 20 minutes run-time; 90 m beam range
Tested using the included battery. Results may vary between torch, environment and usage.
Please note: *The high setting will continue to decrease under continuous use to protect the LED from overheating
Technical Details
Type: Professional handgun light LED torch
Operating Modes: Low / High / Strobe
Luminous Flux: Up to 1000 lumens
Lamp Type: High performance cool white LED
Colour Temperature: 5700 K
CRI: 70
Beam Range: Up to 200 m
Batteries Required: 2 x CR123A Lithium metal (included)
Dimensions: 81 mm x 36.6 mm x 32.5 mm
Weight: 119 grams (including battery)
Body Colour: Black
Body Material: Aluminium alloy
Body Finish: Type III hard anodised
Switch Type: Left and right buttons located on the back
Impact Resistance: 1 m
Environmental: Waterproof to IPX6
Warranty: 5 years (torch)
Packaging and Contents
Supplied in retail packaging and contains:
Olight PL-3S Valkyrie weapon light x 1
CR123A Primary Lithium Cell x 2
GL and 1913 rail mount x 1
H2.5 / H1.5 allen wrench x 1
Manual x 1
