Olight Obulb Plus Multicoloured Rechargeable LED Light Orb (with MCC1A)
The Olight Obulb Plus is an updated version of the Obulb series, offering an output of 300 lumens white light, 6 coloured light outputs and app control.
All this is packed into in a slightly larger yet still mini rechargeable orb that is compact enough to take on your travels in a holdall, hand bag or backpack, so you will always have a light source. The different modes makes this an all round versatile product, of which uses include camping, hiking, night work, emergency power outage, ambience lighting, night light, signalling and party decoration.
The Obulb Plus an be operated manually by pressing down on the top of the torch or to access further features and controls, it can be operated using the Olight Hub App. When using the button a single or double press with the torch on a hard surface will turn the Obulb on the white light output.
Once turned on the button can be pressed to cycle through the different modes in the order of white light, mode 1, mode 2, mode 3, mode 4, mode 5, mode 6 and then off. The Obulb Plus also feature step less dimming by pressing and holding the torch while in any mode.
With App control the white brightness level can be changed as well as dimming the other colours & modes using the brightness slider bar. The colour wheel setting within the Olight Hub App also allows you to custom select a colour, and shows the battery life remaining. Multiple Obulb Plus’s can be connected to the Olight App to allow groups to be created to easily turn on/off the Obulb Plus in that group, and data sharing allows you to give others control of your Obulbs.
To prevent accidental activation, the Obulb Plus has a lock out feature that can be accessed by double pressing the button and then holding for over 2 seconds while the light is off. The lantern will flash before entering the lockout, and if the button is pressed once in lockout, the white will just flash to notify that lockout is engaged. Double press and hold the button again for over 1 second to exit the lockout.
Featuring a magnetic base, the Obulb can be attached to a variety of magnetic surfaces, such as a car bonnet, fridge etc. If you don’t have a magnetic surface, you can also use the included adhesive metal badge to mount your Obulb Plus by simply removing the adhesive film and placing the sticky side onto a surface of your choice, and the Obulb Plus can then magnetise to the metal surface of the badge.
The Obulb Plus is powered by a built-in rechargeable lithium polymer battery with an updated capacity of 2000 mAh, and it uses Olight’s signature Magnetic charging technology to recharge. Simply connect the magnetic end of the included MCC1A cable to the base of the Obulb Plus and plug the USB end into a suitable USB power source. The light on the cable will go red to show charging is in progress and turn green once charging is complete, after approximately 3 hours.
Tough as they come, the Obulb Plus can withstand a drop height of up to 1 metre and is waterproof to IPX7 standard, which makes it ideal for the pool or bathtub as it will float on top of the water to provide ambient lighting.
Please Note: Brightness level adjustment is only available via the Olight App controls, the manual control will only change mode and not the brightness level.
Operational Modes
White Light:
White High Output (lumens): 300 / 180 / 40
White High Run-time (minutes): 20 / 80 / 50
White Low: 0.8 lumens; 49 hours run-time
Coloured Lights (factory default):
Mode 1 Output (lumens): 20 / 5
Mode 1 Run-time (minutes): 260 / 100
Mode 2 Output (lumens): 65 / 40 / 10
Mode 2 Run-time (minutes): 40 / 125 / 115
Mode 3 Output (lumens): 80 / 45 / 15
Mode 3 Run-time (minutes): 40 / 120 / 120 / 10
Mode 4 Output (lumens): 0.5
Mode 4 Run-time (hours): 747
Mode 5 Output (lumens): 75 / 60 / 20
Mode 5 Run-time (minutes): 25 / 115 / 100
Mode 6 Output (lumens): 55 / 25 / 8
Mode 6 Run-time (minutes): 35 / 140 / 45
Note: The above data is measured in lab conditions, therefore results may vary due to environmental and heat dissipation conditions. The overheat protection will decrease the output in Level 7, Level 6 and level 5 to protect the LED.
Technical Details
Type: LED light orb
Operating Modes: White High / White Low / Mode 1 / Mode 2 / Mode 3 / Mode 4 / Mode 5 / Mode 6
Luminous Flux: Up to 300 lumens
Lamp Type: White LED / Multicoloured LEDs
Batteries Required: Built-in 2000 mAh lithium polymer battery
Height: 73.7 mm
Diameter: 80 mm
Weight: 176 grams
Body Colour: Black, White or Orange
Switch Type: Push button
Impact Resistance: 1 m
Environmental: Waterproof to IPX7 standards
Warranty: 2 years
Packaging and Contents
Supplied in retail packaging and includes:
Olight Obulb Plus LED light orb x 1
USB magnetic charging cable x 1
Adhesive metal badge x 1
Manual x 1
