NightSearcher Pulsar Pro Single Rechargeable LED Signal Light
The NightSearcher Pulsar Pro is a rechargeable, fast-deployment hazard warning light designed for traffic control, signalling and hazard awareness.
The Pulsar Pro provides 360° illumination, visible from up to 1 km away, making them ideal for emergency service personnel. Additionally, they emit a vertical beam, perfect for drone and helicopter operations. The automatic switch-on and flash mode allow hazardous situations to be secured as quickly and safely as possible.
They can be placed directly on the ground or secured to metal structures or vehicles with their built-in high strength magnets.
Press the power button on the back of the Pulsar Pro to turn the light on. Each press after will cycle through the rotate, quad flashing, single blink, alternative blinks, SOS rescue, constant high, constant low, 2 LED lights and 4 LED lights. To turn the light off, press and hold the power button for 2 seconds, the two LED’s will flash five times and then turn off. The light will turn on again in the last used output. To turn on the six white LED’s, double press the power button. Double press again to turn off.
To charge the Pulsar Pro, connect the charging lead to the charging base and then place the Pulsar Pro on the base magnetic side down, aligning the positive and negative symbols. The indicator will show red while charging is in progress and turn green when fully charged.
The Pulsar Pro has an IP rating of IPX7 and is crush proof up to 3 tonnes making it the perfect tool in an emergency.
Product Features
Multiple constant & flashing outputs
Built-in rechargeable li-ion battery
Integrated power indicator
Ultra lightweight with multiple uses
Operational Modes
Rotate: 9 hours run-time
Quad Flashing: 9 hours run-time
Single Blink: 60 hours run-time
Alternative Blinks: 9 hours run-time
SOS Rescue: 14 hours run-time
Constant High: 5 hours run-time
Constant Low: 35 hours run-time
2 LED Lights: 28 hours run-time
4 LED Lights: 18 hours run-time
White Torch: 8 hours run-time
Sequential mode: 15 hours run-time
Technical Details
Type: Versatile LED torch
Operating Modes: Rotate / Quad Flashing / Single Blink / Alternative Blinks / SOS Rescue / Constant High / Constant Low / 2 LED Lights / 4 LED Lights
Luminous Flux: Up to 15 lumens (white flash)
Batteries Required: Built-in 700 mAh 3.7 V lithium-ion battery
Measurements: 24 mm x 100 mm
Weight: 200 g
Body Colour: Translucent
Body Material: Durable and sturdy PC material
Switch Type: Push button
Crush Proof: Up to 3 tonnes
Environmental: IPX7
Packaging and Contents
Supplied in retail packaging and includes:
NightSearcher Pulsar Pro Single x 1
Charging base x 1
Charging cable x 1
Car charger x 1
Manual x 1
