Armytek Wizard C2 Pro Multipurpose Rechargeable LED Torch
The Armytek Wizard C2 Pro is a multipurpose rechargeable LED torch, part of the Wizard series. With an output of up to 2500 lumens and multiple turbo and strobe modes, it is perfect for a variety of activities. Available in a white or warm white beam colour.
The Wizard C2 Pro is powered by the included Armytek 18650 3500 mAh lithium-ion battery, however the torch is compatible with all standard 18650 lithium-ion batteries thanks to the full protection against short circuiting.
To charge the torch simply unscrew the tail cap by 1/4 before connecting the magnetic base of the included charger to the tail cap. Plug the charger into a suitable USB power outlet and the charger will flash red while charging is in progress and turn green once charging is complete after approximately 3 hours 40 minutes.
To turn the torch on or off in any setting simply press the side switch located on the head of the torch, thanks to the memory function the torch will turn on in the last used output. The Wizard C2 Pro features both simple and advanced modes. The torch is, by default, in simple mode which allows access to six outputs of firefly 1, firefly 2, firefly 3, main 1, main 2 and main 3. Press and hold the side switch to cycle through the outputs.
To access the advanced operation setting unscrew the tail cap by 1/4 while the torch is off. Then press and hold the side switch while retightening the cap. The advanced setting allows access to all modes including the turbo and strobe outputs. Press and hold the side button while the torch is off to cycle through firefly 1, firefly 2, firefly 3, main 1, main 2, main 3 and turbo modes.
To access the different outputs separately quickly press the side button twice to access the main outputs, three times to access the turbo outputs and four times to access the strobe outputs. To cycle through the outputs while in any mode simply press and hold the side button. While the torch isn’t in use or being transported, unscrew the tail cap by 1/4 to prevent accidental activation.
The Wizard C2 Pro can be used in various ways to suit many activities. The torch can be used as an every day carry with a steel clip included and magnetic base allowing for hands free illumination. The special matt anti-abrasive finish and rough knurling allows for strong grip even in in wet conditions. Or it can also be used as a headtorch with the included comfortable headband which is completely adjustable. The lightweight holder is made from composite material and features quick release silicone for additional fixation. The one motion installation allows for simple one handed operation.
The Wizard C2 Pro is also perfect for sporting activities as it works seamlessly with a range of accessories and is easily mounted. The body is made from durable materials and is shock resistant.
The Wizard C2 Pro features a wide spill beam without a distinct hotspot, preventing fatigue on the eyes after prolonged use. It also features a battery level and temperature indicator. The battery indicator will flash orange once within two seconds, warning that the battery is less than 25%. One red flash within one second means the battery level is critical and below 10%. The temperature indicator will flash orange three times within two seconds as a warning. Three red flashes within one second indicates the temperature level is critical.
Product Features
Wide spill beam
Lockout mode
Magnetic USB charging
Strobe available
Battery level indicator
Temperature indicator
Operational Modes
White Light:
Turbo 3: 2500 lumens; 2 hours, 40 minutes run-time; 131 m beam range*
Turbo 2: 1750 lumens; 2 hours, 45 minutes run-time*
Turbo 1: 870 lumens; 2 hours, 50 minutes run-time*
Main 3: 370 lumens; 5 hours, 15 minutes run-time
Main 2: 160 lumens; 12 hours, 15 minutes run-time
Main 1: 45 lumens; 43 hours run-time
Firefly 3: 6 lumens; 12 days run-time
Firefly 2: 1.5 lumens; 40 days run-time
Firefly 1: 0.15 lumens; 200 days run-time
Strobe 3: 2500 lumens; 5 hours, 45 minutes run-time*
Strobe 2: 2500 lumens; 12 hours run-time*
Strobe 1: 160 lumens; 55 hours run-time
Warm White Light:
Turbo 3: 2330 lumens; 2 hours, 40 minutes run-time*
Turbo 2: 1630 lumens; 2 hours, 45 minutes run-time*
Turbo 1: 810 lumens; 2 hours, 50 minutes run-time*
Main 3: 344 lumens; 5 hours, 15 minutes run-time
Main 2: 149 lumens; 12 hours, 15 minutes run-time
Main 1: 42 lumens; 43 hours run-time
Firefly 3: 5.6 lumens; 12 days run-time
Firefly 2: 1.4 lumens; 40 days run-time
Firefly 1: 0.14 lumens; 200 days run-time
Strobe 3: 2330 lumens / 10 Hz; 5 hours, 45 minutes run-time*
Strobe 2: 2330 lumens / 1 Hz; 12 hours run-time*
Strobe 1: 149 lumens / 1 Hz; 55 hours run-time*
*The outputs will decrease to a lower lumen output to protect the torch from overheating. Please see the product manual for the lower output run-times.
Please note: All the above specifications are test results base on ANSI/NEMA FL1-2009 Standard. The test are performed using the battery included in the set. The data may vary due to environment, heat dissipation and other factors.
Technical Details
Type: EDC hand-held LED torch
Operating Modes: Firefly 1 / Firefly 2 / Firefly 3 / Main 1 / Main 2 / Main 3 / Turbo 1 / Turbo 2 / Turbo 3 / Strobe 1 / Strobe 2 / Strobe 3
Luminous Flux: Up to 2500 lumens CW / 2330 lumens WW
Lens: TIR reflector
Beam Range: Up to 131 m
Batteries Required: 1 x 3500 mAh 18650 lithium-ion (included)
Overall Length: 112 mm
Bezel Diameter: 33 mm
Body Diameter: 20.4 mm
Weight: 65 grams (excluded battery)
Body Colour: Black
Body Material: Aluminium alloy
Body Finish: Type III hard-anodised
Switch Type: Side switch
Impact Resistance: 10 m
Environmental: Waterproof to IPX8 Standard (2 m)
Warranty: 10 years (by manufacturer)
Packaging and Contents
Supplied in retail packaging and contains:
Armytek Wizard C2 Pro torch x 1
Armytek 18650 3500 mAh lithium-ion battery x 1
USB magnetic charging cable x 1
Head mount x 1
Steel pocket clip x 1
Spare O-ring x 2
Manual x 1
